18758116255

新闻资讯 NEWS INFORMATION

网站首页 > 新闻资讯 > 行业资讯
  • 硬脂酸锌的主要用途有哪些呢?
  • 本站编辑:杭州五鑫生物科技有限公司发布日期:2022-02-15 11:01 浏览次数:

 硬脂酸锌主要用作苯乙烯树脂、酚醛树脂、胺基树脂的润滑剂和脱模剂。同时在橡胶中还具有硫化活性剂,软化剂的功能,那么主要用途有哪些呢?我们一起来了解下吧!                       

  主要用途

  1、可用作聚氯乙烯无毒稳定剂,初期着色性小,耐候性较好。本品不易单使用,因其对聚氯乙烯降解有显著的催化作用,经一段时间后,可使制品急剧变色。与钡镉皂配合,用于一般软质制品。本品用量不易过大,但与环氧化合物和亚磷酯配合使用时,可适当提高其用量。

  2、还可用作苯乙烯树脂、包括聚苯乙烯、ABS和SAN树脂的润滑剂和透明制品的脱模剂。在橡胶工业中,本品可用作胶料的润滑剂及隔膜剂(防粘)。此外。还可用作纺织品打光剂、油漆平光剂和化妆品配料。

  3、金属皂类粉剂。用于香粉、粉饼等的创造。主要用作香粉的粘附剂,以增加香粉在皮肤上的附着力。硬脂酸锌质轻柔软,加到粉类化妆品中即包覆在其它粉末外面,使香粉人易透水。加入量一般为5%-15%。

  4、抗泡沫剂。光和热稳定剂。油漆平光剂和以研磨剂。小脚干燥润滑剂和隔离剂。塑料制品的稳定剂、脱膜剂、润滑剂

Zinc stearate is mainly used as lubricant and release agent of styrene resin, phenolic resin and amine resin. At the same time in rubber also has the function of vulcanizing agent, softener, so what are the main uses? Let's learn about it!

The main purpose

1, can be used as polyvinyl chloride non-toxic stabilizer, early coloration is small, good weather resistance. This product is not easy to use alone, because it has a significant catalytic effect on the degradation of PVC, after a period of time, can make the product rapidly discoloration. Combined with barium  cadmium soap, used in general soft products. The dosage of this product is not easy to be too large, but when used with epoxy compounds and phosphite, the dosage can be appropriately increased.

2, can also be used as styrene resin, including polystyrene, ABS and SAN resin lubricants and transparent products of the release agent. In the rubber industry, the product can be used as a lubricant and film separator for rubber materials (anti-stick). In addition. It can also be used as textile glazing agent, paint leveling agent and cosmetic ingredients.

3, metal soap powder. Used for the creation of fragrant powder, powder cake, etc. It is mainly used as an adhesive of fragrance powder to increase the adhesion of fragrance powder on skin. Zinc stearate is light and soft. When added to powder cosmetics, it is coated in other powder, making perfume powder permeable to water. The dosage is usually 5%-15%.

4, anti-foam agent. Light and heat stabilizers. Paint flatting agent and abrasive agent. Foot drying lubricant and isolator. Plastic products stabilizer, film removal agent, lubricant